bikerbiker Aliwheels is a leading motorcycle parts supplier offering free shipping anywhere in the world on orders above $300. Please note that all of our motorcycle parts and accessories are certified and tested. With more than 10,000* products to choose from this is your one place to get the motorcycle part you need. Browse our vast inventory of motorcycle radiators, fairings, clutch plates, headlights, chains, and sprockets. biker

How to Stop Blue Smoke from Motorcycle Exhaust?

Imagine being ready for a nice ride on your motorcycle, but when you start it up, a cloud of blue smoke comes from the motorcycle exhaust. It’s not just annoying—it means something is wrong with your bike. Blue smoke isn’t normal, and it usually means oil is burning where it shouldn’t be.

But what causes this blue smoke? And how can you fix it? In this blog, we’ll go over why blue smoke happens, what you can do to stop it, and how to keep it from coming back. So let’s get started and make sure your bike runs smoothly without blowing blue smoke!


Understanding the Blue Smoke

motorcycle exhaust

Before we fix it, let’s figure out what blue smoke means. When blue smoke comes out of your motorcycle exhaust, it’s because oil is getting burned along with the fuel. This shouldn’t happen because oil is supposed to stay out of the combustion chamber.

But how does oil end up in the combustion chamber? Here are some common reasons:

  1. Worn Piston Rings
    Piston rings help seal the space between the piston and the cylinder walls. When they get old or damaged, oil sneaks past them and burns, causing blue smoke.
  2. Leaky Valve Seals
    Valve seals keep oil from dripping into the combustion chamber. If the seals crack or wear out, oil can get in and burn, creating blue smoke.
  3. Damaged Cylinder Walls
    If your cylinder walls get scratched or damaged, oil can leak past the piston rings and into the combustion chamber.
  4. Too Much Oil
    Sometimes the problem is simple—you’ve put in too much oil. When this happens, the oil might get into places it shouldn’t, causing blue smoke.

Now that you know what could be causing the blue smoke, let’s talk about how to stop it.


Step 1: Find Out What’s Causing the Blue Smoke

Before you fix the problem, you need to figure out what’s causing the blue smoke from your motorcycle exhaust. Here’s how to start:

  • Check the Oil Level:
    The first thing to do is check if you’ve overfilled the oil. Pull out the dipstick and see if the oil is higher than it should be. If there’s too much oil, you can drain some out and see if the smoke stops.
  • Do a Compression Test:
    If the oil level is fine, the next step is a compression test. This test checks if your piston rings are worn. If the compression is low, your piston rings might not be sealing properly.
  • Check the Valve Seals:
    If the compression test is okay, the problem could be with the valve seals. You’ll need to open the valve covers and check the seals for cracks or damage.

Step 2: Fix Worn Piston Rings

If the problem is worn piston rings, you’ll need to replace them. This can be tricky, but with the right tools and some patience, you can do it. Here’s a guide to help:

Tools You’ll Need:

  • Torque wrench
  • Piston ring compressor
  • Cylinder hone
  • Gasket scraper
  • New piston rings

Steps to Follow:

  1. Take Apart the Top of the Engine:
    You’ll need to remove the cylinder head, piston, and cylinder to get to the piston rings.
  2. Remove the Old Rings:
    Carefully take off the old piston rings. Be gentle so you don’t damage the piston.
  3. Clean the Cylinder Walls:
    Use a cylinder hone to clean the walls. This helps the new rings fit better.
  4. Install the New Rings:
    Put the new rings on the piston, making sure the gaps are lined up right so oil can’t get through.
  5. Put the Engine Back Together:
    Reassemble everything, using the torque wrench to tighten bolts correctly.
  6. Test the Engine:
    Start the engine and see if the blue smoke is gone. If it’s gone, your fix worked!

Step 3: Fix Faulty Valve Seals

Tools You’ll Need:

If the valve seals are worn out, they need to be replaced. Replacing valve seals is easier than replacing piston rings, but you still need to know what you’re doing.

  • Valve spring compressor
  • Torque wrench
  • Gasket scraper
  • New valve seals

Steps to Follow:

  1. Remove the Valve Cover:
    First, take off the valve cover so you can see the valve springs and seals.
  2. Compress the Valve Springs:
    Use the valve spring compressor to remove the springs and get to the seals.
  3. Replace the Old Seals:
    Take out the old valve seals and put in new ones. Make sure they’re in the right place.
  4. Put Everything Back Together:
    Put the valve springs back in place and reattach the valve cover. Make sure everything is tightened properly.
  5. Test the Engine:
    Start your bike again and see if the blue smoke is gone. If it’s fixed, you’re all set!

Step 4: Fix the Overfilled Oil

If your engine has too much oil, that’s an easy fix. Here’s how you can drain the extra oil:

  1. Turn Off the Engine:
    Make sure the engine is off and cool before you start.
  2. Find the Oil Drain Plug:
    Look for the oil drain plug at the bottom of the engine.
  3. Drain the Extra Oil:
    Use a wrench to take out the drain plug and let the extra oil drain out. Be careful not to take out too much—just enough to get the oil level back to normal.
  4. Check the Oil Level Again:
    After draining, use the dipstick to make sure the oil level is right.
  5. Start the Engine:
    Turn the engine on and see if the blue smoke is gone. Fixing the oil level should stop the smoke.

Step 5: Keep the Blue Smoke From Coming Back

Once you’ve fixed the blue smoke problem, you want to make sure it doesn’t come back. Here’s how to keep your bike in good shape:

  1. Do Regular Maintenance:
    Check your oil regularly and make sure to change it when needed. This will help prevent future problems.
  2. Use the Right Oil:
    Always use the oil your bike’s manufacturer recommends. Using the wrong oil can cause leaks and blue smoke.
  3. Don’t Overfill the Oil:
    Always check your oil level carefully and don’t put in too much. Overfilling the oil can cause big problems.
  4. Watch for Signs of Trouble:
    Keep an eye on your bike’s engine. If you notice anything unusual, like smoke or leaks, fix it right away.

Final Verdict! Ride Without the Blue Smoke from Motorcycle Exhaust

Blue smoke from your motorcycle isn’t something to ignore, but with the right steps, you can fix the problem. Whether it’s worn piston rings, leaky valve seals, or just too much oil, you now know how to diagnose and fix the issue. By taking care of your bike, you can make sure it runs smoothly and smoke-free.

Regular maintenance is the key to keeping your motorcycle in top shape. Keep checking your oil, fix problems when they happen, and enjoy your rides without worrying about blue smoke coming from the motorcycle exhaust.

Share :

Facebook
Twitter
WhatsApp
Pinterest
Email

Table of Contents

Join The Ride

Subscribe to our fortnightly newsletter with stories from our latest adventures and the best travel tips

Or login with your social account